BYK359 BYK360P 361N供應BYK364P

byk-364 P是一種有效的抗縮孔劑。減少桔皮效應通過優化平

properties of the powder coating. Pinholes, ?sh eyes and other surface defects are prevented. The polar structure

粉末涂料的性能。?針孔，SH的眼睛和其他表面缺陷的防止。極結構

of the additive improves pigment wetting and substrate wetting. A better DOI value (distinctness of image)

該添加劑改善了顏料潤濕基材潤濕。一個更好的DOI值（影像清晰度）

and a surface with fewer pinholes is achieved, especially in TGIC-alternative powder coating systems. BYK-364 P

并減少針孔的表面來實現，特別是在TGIC粉末涂料系統的選擇。byk-364 P

is an OH-reactive additive which can be integrated in the polymer compound by reacting with suitable binders.

是哦，活性添加劑可以通過合適的粘合劑反應集成在高分子化合物。

Recommended Use

推薦使用

The additive is recommended for powder coatings based on epoxy, polyester, polyurethane and acrylate resins

添加劑是推薦用于粉末涂料以環氧，聚酯，聚氨酯和丙烯酸樹脂

and polyester/epoxy combinations.

聚酯/環氧樹脂組合。

Recommended Levels

建議的水平

0.5-2 % additive (as supplied) based upon total formation.

0.5-2%添加劑（供應）根據總的形成。

The above recommended levels can be used for orientation. Optimal levels are determined

上述建議的水平可用于定位。確定了最佳水平

through a series of laboratory tests.

通過一系列的實驗室測試。

Incorporation and Processing Instructions

注冊和處理指令

The additive is mixed with resin, hardener, pigments and other raw materials in a high-speed mixer and then

添加劑的混合樹脂，固化劑，在高速混合機中混合顏料和其他原材料，然后

extruded. Good dispersion of the additive by the extruder promotes gloss and leveling of the powder coating

擠壓。通過擠出機提升光澤的粉末涂料流平助劑的分散性好

and prevents the formation of craters, ?sh eyes and seeds.

防止形成的隕石坑，?SH的眼睛和種子。