810深孔鉆油 模具鉆孔冷卻油熱銷Deep hole dri

810 deep hole drilling cutting oil pure oil mold drilling cooling oil



——Efficient cooling, precise lubrication, and industrial grade solutions



1、 Product POSTTTIONing



810 deep hole drilling cutting oil and pure oil mold drilling cooling oil are specially designed for high-precision and high load drilling scenarios, suitable for:



Deep hole drilling (hole depth to diameter ratio ≥ 10:1)

Difficult to machine materials such as mold steel, titanium alloy, quenched steel, etc

Industrial equipment such as CNC machine tools, deep hole drilling machines, precision mold processing centers, etc

2、 Core selling points

1. Ultra strong infiltration cooling technology

Nanoscale molecular structure: rapidly penetrates into the gap between the drill edge and the hole wall, reducing the cutting zone temperature to ≤ 60 ℃ and minimizing tool thermal wear.

Actual test data: Compared with ordinary cutting oil, the tool life is increased by 8% and the drilling efficiency is increased by 5%.

2. Double lubrication protection

Extreme pressure anti-wear formula: sulfur-containing chlorine composite additive, forms a stable lubricating film under high pressure, with a friction coefficient of ≤ 0.05 (ASTM D5183 standard).

Rust and corrosion prevention: The pH value is stable at 8.5-9.5, protecting the workpiece and equipment from oxidation and corrosion.

3. Environmental and safety upgrades

Low volatility and low odor: VOCs emissions are less than 50mg/m 3 (better than 80% of the national standard), improving the workshop environment.

3、 Comparison of Technical Parameters

Index 810 deep hole drilling cutting oil

Kinematic viscosity (40 ℃) * * * * mm 2/s 20-28 mm 2/s

Flash point (open cup) ≥ 175 ℃ ≥ 180 ℃

Pour point ≤ -15 ℃



4、 Case: Processing of Top Needle Holes in Automotive Molds



Material: H13 mold steel (HRC 52-54)

Pain point: The hole accuracy requirement is ± 0.02mm, and ordinary cooling oil leads to excessive roughness of the hole wall

Solution: Switch to pure oil mold drilling cooling oil

Result: The surface roughness was optimized from Ra 3.2 μ m to Ra 1.6 μ m, and the yield was increased to 28%

5、 Usage Guide



Recommended ratio:

Deep hole drilling: using the original solution without dilution





Maintenance suggestion:



Check the pH value and impurity content of the oil every 500 hours

Regularly clean the oil circuit filter of the machine tool

6、 Safety and Storage

Operation protection: Wear goggles and non slip gloves to avoid direct contact with the skin

Storage conditions: cool and sealed environment, shelf life of 36 months

810深孔鉆切削油 純油模具鉆孔冷卻油?

——高效冷卻·精準潤滑·工業級解決方案?

一、產品定位?

810深孔鉆切削油?與?純油模具鉆孔冷卻油?專為高精度、高負荷鉆孔場景設計，適用于：

深孔鉆削?（孔深徑比≥10:1）

模具鋼、鈦合金、淬火鋼?等難加工材料

數控機床、深孔鉆床精密模具加工中心?等工業設備

二、核心賣點

1. 超強滲透冷卻技術?

納米級分子結構?：快速滲透至鉆頭刃口與孔壁間隙，降低切削區溫度至 ?≤60℃?，減少刀具熱磨損。

實測數據?：相比普通切削油，刀具壽命提升 ?8%?，鉆孔效率提高 ?5%?。

2. 雙重潤滑防護?

極壓抗磨配方?：含硫-氯復合添加劑，在高壓下形成穩定潤滑膜，摩擦系數 ?≤0.05?（ASTM D5183標準）。

防銹防腐蝕?：pH值穩定在8.5-9.5，保護工件與設備免受氧化銹蝕。

3. 環保安全升級?

低揮發低氣味?：VOCs排放量 ?＜50mg/m3?（優于國標80%），改善車間環境。

三、技術參數對比?

指標? ?810深孔鉆切削油? 

運動粘度（40℃）**** mm2/s 20-28 mm2/s

閃點（開口杯） ≥175℃ ≥180℃

傾點 ≤-15℃

四、案例：汽車模具頂針孔群加工?

材質?：H13模具鋼（HRC 52-54）

痛點?：孔位精度要求±0.02mm，普通冷卻油導致孔壁粗糙度超標

解決方案?：切換至純油模具鉆孔冷卻油

結果?：表面粗糙度從Ra 3.2μm優化至Ra 1.6μm，良率提升至28%?

五、使用指南?

配比推薦?：

深孔鉆削：原液使用，無需稀釋

維護建議?：

每500小時檢測油液pH值及雜質含量

定期清理機床油路過濾器

六、安全與儲存?

操作防護?：佩戴護目鏡及防滑手套，避免直接接觸皮膚

儲存條件?：陰涼密閉環境，保質期 ?36個月?