1．臺歷 掛歷 筆記本全自動YO單/雙線圈裝訂機安全操作注意事項 Notice of safety operate

1.1 操作機器以前，必須仔細閱讀本機器說明書。

Before operating the machine, you must read the machine manual carefully.

1.2 了解臺歷 掛歷 筆記本全自動YO單/雙線圈裝訂機各部分的作用和潛在危險區域，知道必要的安全措施。

Understand the role of the various parts of the machine and potentially dangerous areas, and know the necessary safety measures

1.3 啟動臺歷 掛歷 筆記本全自動YO單/雙線圈裝訂機前，檢查機器各手柄，按鈕是否處于預定的工作位置。

Before starting the machine, check the handle of the machine and whether the button is in the intended working POSTTTION. 

如果機器工作時突然停止，不要馬上重新啟動，應該按下“總?！弊枣i按鈕，檢查停機原因，待故障排除后方可重新啟動。                 If the machine suddenly stops working, do not restart immediately, you should press the "total stop" self-locking button, check the cause of the shutdown, to be troubleshooting before you can restart. 
1.5 不允許在臺歷 掛歷 筆記本全自動YO單/雙線圈裝訂機運轉時，維護運動零部件和靠近運動零部件的其他零部件。 It is not permissible to maintain moving parts and other parts near moving parts while the machine is running.
1.6 臺歷 掛歷 筆記本全自動YO單/雙線圈裝訂機大面積保養或修理時，必須按下“停止”自鎖按鈕，切斷所以電源、氣源。Large area maintenance or repair, you must press the "stop" self-locking button, cut off the power supply, gas source. 

1.7 臺歷 掛歷 筆記本全自動YO單/雙線圈裝訂機在進行調整、保養和修理工作時，不得使用不適當?shù)墓ぞ?。工作完畢后必須清理檢查機器上的工具和其他雜物，以免發生故障。 Undue tools should not be used for adjustment, maintenance and repair work. After the work must be cleaned to check the tools and other debris on the machine, so as to avoid failure.

1.8 在重新啟動臺歷 掛歷 筆記本全自動YO單/雙線圈裝訂機前，應檢查所有安全設施是否處在正常位置，是否緊定，注意機器周圍的其他人員是否處在安全的位置。 Before restarting the machine, check that all safety devices are in their normal POSTTTION, are they tightened, and that the rest of the machine is in a safe place.
1.9 保持臺歷 掛歷 筆記本全自動YO單/雙線圈裝訂機和周圍環境的清潔，及時清除掉落在地板上的油污，清理工作區的工具、抹布及碎紙廢料等。 Keep the machine and the surrounding environment clean, remove the oil on the floor in a timely manner, clean up the work area of the tools, rags and shredded scrap.
1.10 及時維護、更換臺歷 掛歷 筆記本全自動YO單/雙線圈裝訂機已失效和損壞的裝置，及時報告機器發生的問題。Timely maintenance, replacement of failure and damage to the device, the timely report of the machine problems.