菏澤grc構件_泰安grc構件-濟南浩博建材
GRC構件在建筑物連接點如何安裝？
GRC構件在建筑物連接點的安裝可以用多種方式，下面就來簡單的介紹幾種常見的方式。
GRC member installation of the building connection point can be used in many ways, the following brief introduction to several common ways.
1、采用焊接方式連接時，焊接鋼筋時，雙面焊縫長度不應小于5倍鋼筋直徑，單面焊接焊縫長度不應小于10倍鋼筋直徑。焊縫高度不小于3㎜，焊縫等級不低于二級，禁止使用點對點、點對面的焊接方式。
1, connected using welding, welding steel, double-sided weld length of not less than five times the bar diameter, single-sided welding seam length of not less than 10 times the bar diameter. Weld height of not less than 3 mm, weld rating of not less than two, prohibit the use of point to point, point opposite the welding.
2、當grc線條自重小于25kg時，安裝連接點不少于4個，采用上下后左右連接；當GRC構件自重大于25kg時，每增加10kg，應至少增加兩個連接點；連接點間距不得大于400㎜
2, when grc line weight less than 25kg, installation and connection point of not less than 4, about the connection after the up and down; when GRC component weight greater than 25kg, each additional 10kg, should be increased by at least two connection points; a connection point spacing can not be greater than 400 mm
最后grc線條廠家提醒大家在安裝完畢后要做好防腐處理。
Finally grc line manufacturers to remind you to do after installation embalmed.
公司地址：濟南市長清區崮云湖街道辦事處坡莊村104國道路北
公司電話：0531-87410258
聯系人手機：18866832788
QQ: 2418014797
網址：http://www.sdjnhbjc.com
聯系人：司經理(銷售)
手機：18866832788
郵箱：haobojiancai@163.com
*您的姓名：
*聯系手機：
固話電話：
E-mail:
所在單位：
需求數量：
*咨詢內容:
898995850
